How To Perform a Manual Reset of the Skiply Clock E Feedback Device

How To Perform a Manual Reset of the Skiply Clock E Feedback Device

How To Perform a Manual Reset of the Skiply Clock E Feedback Device

  1. Ensure you have a Skiply Reset Magnet or any other strong magnet equivalent  

  2. Whilst pressing and holding down any of the four Service buttons:

    a. place the magnet on the faceplate in the area between the words “comfort” and “zu” then,

    b. move the magnet in slow small circles for 3-4 seconds, then release the button and lift off the magnet

    c. the three LEDs should begin to flash green/red and cycle though the reset


Banner


  • Note: The reset will end with a long flash of red LED’s

The manual reset is now complete

Did this doc help you?

For further questions or support, please contact us at support@microshare.io
ms logo