Environment Monitoring Installation Guide

How to install a Microshare Environment Monitoring solution

Environment Monitoring Solution Installation Guide

This document includes important details on the correct, safe and efficient methods of installation for Microshare Smart FM Solutions.

We have delivered and installed thousands of sensors to clients all over the world across a wide range of range of applications, so please get in contact with us if you need any assistance. Our expert team are on hand and ready to support you.

Contact installation@microshare.io should you require any assistance

Note

Using your Microshare solutions safely

• Follow the stated battery requirements before installing any batteries.
• Never force a connector into a port. If the connector and port don’t join with reasonable ease, they probably don't match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port.
• Protect Microshare sensors from direct sunlight, wherever possible.
• Use Microshare solutions in environments according to their specification. Most products arefor indoor use only.
• There are no user-serviceable parts inside Microshare sensors. For service personnel: Always unplug external power supply, remove batteries, and turn off UPS battery before service operation.
• Microshare sensors may be damaged by improper storage or handling. Take care not to drop them during transport and installation.

WARNING: Do not attempt to open or disassemble any Microshare solutions. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Microshare may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

SE01 – Environment Monitoring

The Environment Monitoring solution from Microshare is a complete sensing service for facilities managers looking to monitor the indoor air and environment quality around their buildings.

What’s in the box? In terms of deploying quickly, the Environment Monitoring solution from Microshare includes long-life battery-operated wireless sensors, which can be easily and discreetly installed around buildings, device connectivity, access to data and alerts via Microshare Business Tools dashboards or direct API access to data through the Microshare Smart Network.

Installation instructions:

1. Activating the sensor - Our wireless sensors are pre-installed with batteries. To activate pull the shipping isolating battery tab from the sensor. - The LED on the sensor should begin to flash intermittently.
2. Preparing the sensor for fixing - Using a suitable adhesive tape, ensure that you place the tape on the opposite side of the QR code, covering the QR code will prevent you from using the Deploy-M app to add your device to the system.
3. Registering the sensor using the Deploy-M app [iOS & Android] - You should already have the Deploy-M app and login details as part of your project set-up with Microshare - Login using your credentials, if you are unsure or require assistance, please contact installation@microshare.io
- Select the correct device cluster for the devices you are installing. Note – a “Device Cluster” is simply grouping of sensors, usually in one space, that helps identify and annotate the data you receive from your Microshare solution.
- Select the correct location where the device will be installed.
- Click Add
- Once the sensor has been added to the correct location on the app, click & RESCAN to open the devices camera
- Scan the QR code located on the Sensor
- Check that the Dev EUI [usually the second code on the sensor under the QR code] the shown matches the one on your device, then select save from the bottom of the screen.
4. Fixing the Environment Monitoring sensor - Once you have completed the registration of the sensor on the Deploy-M app, you are ready to fix the sensor in place. - Peel the adhesive sticker on the back of the device and attach in the pre-assigned location. We recommend attaching the sensor out of reach.

Did this doc help you?

For further questions or support, please contact us at support@microshare.io