Skiply Clock E Installation

Skiply Clock E Installation

How to Install a Skiply Clock-E Feedback Device

  1. Apply six pieces of adhesive to the back of the device.

  2. Scan and twin device to the correct location.

  3. Remove the backing from the adhesive.

  4. Press the adhesive side of the device to the desired location on the wall.

    • Device should be 48 inches high from the ground.

    • Press against wall for 30 seconds to allow the adhesive to bond to the wall.

  5. Perform a Badge-In.

  6. Confirm Date & Time update.

Did this doc help you?

For further questions or support, please contact us at support@microshare.io

ms logo