TABS Open Close Installation TABS Open Close Installation How to Install a TABS Open/Close Sensor Activate the sensor by pulling the isolating battery tab from the sensor. </br> Apply the adhesive tape to the side of the sensor that does NOT have the QR code. </br> Log in to the Deploy-M2 app using your account credentials. </br> Select the correct device cluster for the device you are installing. Note: a Device Cluster is simply a grouping of sensors by sensor type and install location. </br> If tags have been created in advance, Select the location where the device will be installed. Click on the Camera icon. </br> Scan the QR code on the sensor. </br> Enter the appropriate location tags. </br> Confirm the DevEUI on the sensor is now paired to the location in Deploy-M. Select Save at the bottom of the screen. </br> Peel off the cover on the adhesive and press the device to the wall next to the opening you wish to monitor. Stick the magnet to the door or window close to the sensor, ensuring these align. </br> Press the sensor to the doorway for 30 seconds to allow the adhesive to fully bond. Did this doc help you? For further questions or support, please contact us at support@microshare.io