Fridge Monitoring Installation Guide How to install a Microshare Fridge Monitoring solution Fridge Monitoring Solution Installation Guide This document includes important details on the correct, safe and efficient methods of installation for Microshare Smart FM Solutions. We have delivered and installed thousands of sensors to clients all over the world across a wide range of range of applications, so please get in contact with us if you need any assistance. Our expert team are on hand and ready to support you. Contact installation@microshare.io should you require any assistance Note Using your Microshare solutions safely Follow the stated battery requirements before installing any batteries. Never force a connector into a port. If the connector and port don’t join with reasonable ease, they probably don't match. Make sure that the connector matches the port and that you have positioned the connector correctly in relation to the port. Protect Microshare sensors from direct sunlight, wherever possible. Use Microshare solutions in environments according to their specification. Most products arefor indoor use only. There are no user-serviceable parts inside Microshare sensors. For service personnel: Always unplug external power supply, remove batteries, and turn off UPS battery before service operation. Microshare sensors may be damaged by improper storage or handling. Take care not to drop them during transport and installation. WARNING: Do not attempt to open or disassemble any Microshare solutions. You run the risk of electric shock and voiding the limited warranty. No user-serviceable parts are inside. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Microshare may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. SM02 – Fridge Monitoring The Fridge Monitoring solution from Microshare is a complete sensing service for facilities managers looking to monitor the temperature in fridges and other cold storage areas. What’s in the box? In terms of deploying quickly, the Fridge Monitoring solution from Microshare includes long-life battery-operated wireless sensor with temperature sensing probes, device connectivity, access to data and alerts via Microshare for Business dashboards or direct API access to data through Microshare Smart Network. In order to install the solution, you will also need zip ties and a magnet, not provided. Installation instructions: 1. Activating the sensor - Our wireless sensors are pre-installed with batteries. To activate simply hold a magnet against the raised circle highlighted in the picture. You will know the device is activated as the device LED’s will flash through the plastic in the bottom of the deviceSee example in this video: Watch this step in video 2. Preparing the sensor for fixing - If you are fixing the sensor using suitable adhesive tape, ensure that you place the tape on the opposite side of the QR code. 3. Registering the sensor using the Deploy-M app [iOS & Android] - You should already have the Deploy-M app and login details as part of your project set-up with Microshare- Login using your credentials, if you are unsure or require assistance, please contact installation@microshare.io - Select the correct device cluster for the devices you are installing. Note – a “Device Cluster” is simply grouping of sensors, usually in one space, that helps identify and annotate the data you receive from your Microshare solution. - Select the correct location where the device will be installed. - Click Add - Once the sensor has been added to the correct location on the app, click & RESCAN to open the devices camera - Scan the QR code located on the Sensor - Check that the Dev EUI [usually the second code on the sensor under the QR code] the shown matches the one on your device, then select save from the bottom of the screen. 4. Fixing the fridge Monitoring sensor - Once you have completed the registration of the sensor on the Deploy-M app, you are ready to fix the sensor in place.- Peel the adhesive sticker on the back of the device and stick the device to the outside of the fridge in the pre-assigned location. - Once the sensor housing is secure, stick the adhesive pads to the cable roughly an inch [2.5cm] from the probe (which is at the end of the cable) as shown - Secure the probe inside of the fridge using the adhesive strips which you attached. We recommend installing the probe in the top of the fridge You are now ready to start receiving data from your fridge. Did this doc help you? For further questions or support, please contact us at support@microshare.io